Home > Repair tools > repair tools
| SUNKKO PS-152E Multifunction Precision Digital DC Power Supply | |||||
 |
|||||
| Product No.: | SK-152E | ||||
| Type: | DC/ RF Power Supply | ||||
| Description: |
PS-152E (0.15V～15V), (0~2A) == FEATURE == **Adopt the newest ideas and new circuit design enables super performance. It is suitable for production line testing and technician R&D testing. 1) Multi-voltage output totally 3 groups power supply for main control power, +5V power and -5V power. It is very convenient for production line testing. 2) Maximum current stabilized protection and cut-off type circuit protection could be adjusted continuously. The protection has prompt response preventing further damage of circuit board from short circuit loading and current overload. 3) Dynamic current monitor prompt reflects loaded transient status to let the technician easily judge the faulty part of circuit board. 4) It shows mobile phone frequency field (RF) and RF indicator which let the technician has RF reference data and then judge normal RF. 5) Additional standard 1KHz vibration signal power is used for testing voice frequency channel (VC) of electronic products. 6) High precision 4 digits LED display 0.15V～15V/20V/30V of current and voltage 0-2A/3A/5A. 7) Alternative 220V/110V power selection for global usage. == SUNKKO 152E == Voltage: 220V±10%, 50/60Hz Voltage Output: DC 0.15V~15V Loading Stability: ≦0.01% ±5mv Power Stability: ≦0.01% ±2mv Ripple Output: ≦5mv (RMS) Current: 0~2A Current Loading Stability: ≦0.2％ ±2mA Current overload protection: 2A +/-10% Secondary Output: +5V +/-0.1V/500mA, -5V +/-0.1V/-50mA, 1KHZ.Vpp=20V DVM Test: DC 0-10V ±2.5％ Display: LED 4 digits x 2 Dimension: 125(L)200(W)150(H) mm Packing: 26x17x19 cm Gross Weight: 2.1 kg PS-152E 多功能精确数显维修电源 (0.15V～15V), (0~2A) == 特 式 == **采用了最新的意念和新型的电子线路, 达到高超的性能, 适合于生产线测试或工程师研发测试使用。 1) 多电压输出, 共三组电源式的设计, 分别是主调电源、正5V电源、负5V电源, 非常方便生产线上的测试。 2) 最大电流恒定保护及截止式保护电路, 保护动作连续可调, 对负载的短路和过流及时起控, 免除故障电路板的再损坏。 3) 具有动态电流监测器, 能瞬时反映出负载跳变电流状态可使维修者更容易判断电路板的故障部分。 4) 具有手机射频场强, 射频电压指示器, 不管是否采用稳压电源供电, 均可测出手机射频场强参考值, 使维修者能在一接上稳定电源后马上知道手机的发射情况, 以判断射频输出是否正常。 5) 新增标准1KHZ振荡信号源方便测试电子产品的音频通道。 6) 高精度4位电流LED显示0.15V～15V/20V/30V及4位电压LED显示0-2A/3A/5A。 7) 220V/110V电压切换选择, 方便不同地区使用。 == SUNKKO 152E == 电压: 220V±10%, 50/60Hz 电压输出: DC 0.15V~15V 负载稳定度: ≦0.01% ±5mv 电源稳定度: ≦0.01% ±2mv 输出纹波噪声: ≦5mv (RMS) 恒定电流: 0~2A 电流负载稳定度: ≦0.2％ ±2mA 电流过载保护值: 2A±10% 副输出: +5V±0.1V/500mA; -5V±0.1V/-50mA; 1KHZ.Vpp＝20V DVM测量: DC 0-10V ±2.5％ 显示数位: 双四位LED数码 机身: 125(长)200(阔)150(高)毫米 包装: 26x17x19厘米 毛重: 2.1千克 |
||||